MEMORY EXPANSION / USB CONNECTION
RS Media has built in onboard memory on which you can store your
media les and personalities. You can expand the memory capacity on RS
Media using a SD card (sold separately) in the SD card slot.
There are two types of memory available on RS Media:
• Onboard memory. Memory that is built-in on RS Media and cannot
be removed. There is a total of 42 Mbytes of accessible memory
space (about 22 Mbytes free space) in RS Media built-in onboard
memory.
• Expandable memory. Memory that you can store on an SD card. You
can increase RS Media’s memory space by using an SD card in the
built-in SD card slot. The maximum size for the SD card is 1 GByte.
To insert the SD card into the SD card slot:
Make sure RS Media is turned off.
Insert the SD card into the slot as illustrated. Push the card into the
slot until it is seated properly (the card will click).
Reboot RS Media after inserting the SD card.
To remove the SD card from the SD card slot:
Make sure RS Media is turned off.
Push the SD card inwards. The SD card will eject from
the SD card slot.
Remove the SD card.
You can transfer les from a PC to an SD memory card inserted in RS
Media using the USB cable provided. Note that les that can be played
are limited to those le formats supported by the system and the Editing
Suite software must be used for data transfer.
You can connect a USB cable to RS Media and a PC without
turning off the power.
Connect the USB cable to RS Media and your PC as shown.
Select ‘USB Mode’ from the Options
menu on RS Media, and press the
Select button.
Comments to this Manuals